High cut helmet cover V1

<p>The world is full of covers for high cut helmets, but since 99% of these offer no real way of properly camouflaging the helmet with foliage etc. we decided to throw our offering out there too. Made from 500D Cordura instead of regular clothing fabric to provide high wear resistance. </p><br>
<p>Unlike most high cut helmet covers, which only have that zig-zag cordage on the top, our cover features attachment points for elastic cordage all around the helmet shell. This actually allows you to camouflage your helmet properly with foliage and stuff. Since the elastic cordage is not sewn to the cover you can opt not to use it at all, or to tweak/replace it as needed.</p><br>
<p>The rear top of the cover features a length of 25 mm webbing, bartacked to form attachment points for IR strobes etc. Then we have the standard bits of loop on the sides, top and rear for identifiers, patches, cameras, counterweight pouches etc.</p><br>
<p>The cover attaches to pieces of hook on the inside of the helmet shell via six pieces of one-wrap. If your particular helmet doesn’t have bits of hook exactly where it needs to be: that’s why we include a 50 x 150 mm piece of adhesive hook with each cover! Cut and stick it where you need it.</p><br>
<h3>Sizing, fit and compatibility </h3><br>
<p>These are sized according to Ops-Core FAST helmet sizes. An L size cover will fit a L size helmet, an XL size cover an XL size shell. At the moment we are not offering M or XXL size covers, but L size covers will fit M size shells (and XL size covers will also fit L size shells) with the elastic cord offering a sort of size adjustment system.</p><br>
<p>Remember that each cover comes with a piece of adhesive hook tape, use this to create suitable attachment points inside your helmet for the attachment straps! The elastic cord that wraps around the helmet allow you to tighten and shape the cover to better fit the contours of helmet shells of various shapes and dimensions.</p><br>
<p>Besides the perfect match, the Ops-Core FAST XP, we have also tested the fit on a number of other common helmet designs:</p>
<ul><li>- Ops-Core FAST SF (super high cut): fits pretty nicely after some adjusting</li><li>- UaRms TOR-D (a bit thicker shell than Ops-Core): fits really nicely</li><li>- Galvion Caiman ballistic (quite a different shape): fits pretty nicely after some adjusting</li><li>- PGD ARCH (old gen, Ops-Core XP shell geometry): fits really nicely</li><li>- PGD ARCH/MICH (current (2023) gen): fits, but NVD bungees and rear rail screws end up under the cover*</li></ul><br>
<p>*Current generation PGD ARCH/MICH helmet rails end up covered by the cover at the front and back. This blocks access to the rear rail screws (NVD counterweight pouch attachment) and the NVD bungee cords at the front of the rails. You can easily modify the cover by carefully cutting small holes (and carefully burning them to prevent fraying) for the bungees and screws. Any modifications to the cover are of course done at your own risk!</p>